High Performance Reliable Chicken Manure Rotary Drum Dryer with Large Capacity
Description:
Rotary Drum Type Dryer is a continuous drying equipment with large processing capacity. It is composed of heating source, main rotating kiln/drum body, feeding device, driving cooling pipes, oil fuel system, discharging part, air inlet, exhaust dust collecting device,etc.
Wet material is loaded from one side of the rotary drum dryer, and then it is stirred by the bafflers which is distributed uniformly on the drum. The material will be stirred to distribute and dispersed uniformly in the drum dryer and fully contact with the hot air flow from parallel or converse direction. So the drying processing speed is improved and the impulse power of media transfer is enhanced.
During the drying process and under the effect of tilted bafflers and hot air flow, the material will move to the rotary discharge valve on the other side of the rotary drum dryer.
Application:
Applied for materials under low temperature and continuous large amount of production capacity.
Applicable for drying powder, big particles, blocks, caking, big bulk density materials.
Widely used in chemical, mining, metallurgical industries.
For example: mine, blast furnace cinder, coal, metal powder, phosphate fertilizer, thiamine and so on.
Used for drying special requirement: such as: HP forming agent, HP vesicant, alcohol residues, light calcium carbonate, active clay, magnetic powder, graphite, medical herbal residues, lees.
It has high degree of mechanization and high production capacity.
Broad application, less resistance for the air flow and low power consumption.
Stronger applicable ability to many different characteristics of materials.
Stable operation, lower operation cost an better uniformity of dried product.
Model | Drum Diameter | Drum Length | Capacity | Motor/Revolution | Install Angle | Final Moisture |
RDD1.0×5-10 | 1M | 5~10M (depends) | 0.5~1.2 T/h | 4~5.5kw/2~7RPM | 2~5° | ≤1.5% |
RDD1.2×6-12 | 1.2M | 6~12M (depends) | 1.5~3 T/h | 5.5~11kw/2~7RPM | 2~5° | ≤1.5% |
RDD1.5×12-18 | 1.5M | 12~18M (depends) | 3~5.5 T/h | 11~15kw/2~5RPM | 2~5° | ≤1.5% |
RDD1.8×12-18 | 1.8M | 12~18M (depends) | 5~6.5 T/h | 18.5~22kw/2~3RPM | 2~5° | ≤1.5% |
RDD2.0×18-20 | 2.0M | 18~20M (depends) | 6.5~10 T/h | 22kw/2~3RPM | 2~5° | ≤1.5% |
RDD2.2×12-22 | 2.2M | 12~22M (depends) | 7~12 T/h | 22~30kw/2~3RPM | 2~5° | ≤1.5% |
RDD2.4×15-20 | 2.4M | 15~20M (depends) | 9~15 T/h | 30~37kw/2~3RPM | 2~5° | ≤1.5% |
RDD3.0×20~25 | 3.0M | 20~25M (depends) | 16 T/h | 55kw/1~3RPM | 2~5° | ≤1.5% |
RDD3.5×20-30 | 3.5M | 20~30M (depends) | 16~25 T/h | 75~110kw/1~3RPM | 2~5° | ≤1.5% |
Data sheet
of some materials | Direct heating
Down-flow
specification | Direct heating
Down-flow
specification | Direct heating
reverse-flow
specification | Direct heating
reverse-flow
specification | Complex heating
specification | Complex heating
specification |
Raw materials | ore | foaming agent | blast furnace slag | ammonium sulphur | phosphate fertilizer | coal |
Diameter of the drum | 2.0M | 1.5M | 2.0M | 2.3M | Outer drum 2.0M
Inner drum 0.84M | Outer drum 2.4M
Inner drum 0.95M |
Length of the drum | 20M | 12M | 17M | 15M | 10M | 16M |
Loading efficiency | | 6.3% | 7% | 7.5% | 7.8% | 18% |
Handling capacity | 1000 kg/h | 466 kg/h | 15000 kg/h | 20000 kg/h | 12000 kg/h | 5000 kg/h |
Primary moisture | 30% | 13% | 6% | 1.5% | 5% | 6.5% |
Final moisture | 15% | 0.3% | 1.0% | 0.1 | 0.1 | 0.1 |
Average particle diameter | 6.5mm | 0.05mm | 4.7mm | 0.5~0.7mm | 0.5mm | 5mm |
Raw material bulk density | 0.77 g/cm3 | 0.8 g/cm3 | 1.89 g/cm3 | 1.1 g/cm3 | 1.5 g/cm3 | 0.75 g/cm3 |
Amount of hot air | 39000 m3/kg | 5400 m3/kg | 10750 m3/kg | 9800 m3/kg | 6500 m3/kg | 16000 m3/kg |
Temperature at air inlet | 600ºC | 165ºC | 500ºC | 180ºC | 650ºC | 570ºC |
Temperature at material outlet | | 42ºC | 100ºC | 70ºC | 80ºC | 75ºC |
Heating method | gas | electricity | Heavy oil | Coal-fired thermal furnace | Heavy oil | Heavy oil |
Motor power | 22 kw | 7.5 kw | 15 kw | 11 kw | 11 kw | 15 kw |
Rotating revolution | 4 RPM | 4 RPM | 3.5 RPM | 3 RPM | 4 RPM | 2 RPM |
Slope angle | 0.04 | 0.005 | 0.03 | 0.05 | 0.05 | 0.043 |
QTY of stirring plates | 12 pcs | 24 pcs | 12 pcs | 22 pcs | Inner drum 8 pcs
Outer drum 16 pcs | Inner drum 6 pcs
Outer drum 2 pcs |
